Sinotimer Tm-630s Manual May 2026

A: Usually means a programming conflict (e.g., OFF time set before ON time without crossing midnight, or overlapping programs). Press R and reprogram.

A: Yes. Use Program 1 for Monday (set 1ON at 8AM, 1OFF at 5PM). Use Program 2 for Tuesday. Or use the "Weekly" mode (Mode 4) where you can set 7 different groups. sinotimer tm-630s manual

Here is the key interpretation:

– Simple 24-hour repeating timer with one ON time and one OFF time. A: Usually means a programming conflict (e

Always disconnect mains power before opening the terminal cover or changing wiring. Voltages inside can be lethal. Last updated: October 2026. This guide is for informational purposes. Always refer to the original product documentation for specific model variations. Use Program 1 for Monday (set 1ON at 8AM, 1OFF at 5PM)

A: The TM-630S uses a crystal oscillator. ±0.5 seconds/day is normal. If losing minutes, the internal crystal may be damaged. Press R and reset.

| Mode | Display Symbol | Meaning | Typical Use | | :--- | :--- | :--- | :--- | | | Single block | Timer cycles once at set time | Delayed start | | Mode 2 | Recurring arrow | Continuous cycles (ON for X min, OFF for Y min) | Hydroponic pumps | | Mode 3 | 24H + cycle | 24-hour cycle with specific ON/OFF times | Street lights | | Mode 4-17 | Weekday sequences | Different programs for different days | Office lights (M-F, Sa-Su separate) |