Simatic — S7dos

int main() // 1. Establish connection to S7DOS service s7_connect(2, 0, 2); // CPU rack 0, slot 2, address 2

if (result == 0) float value = *(float*)buffer; printf("Read value from DB10: %f\n", value); else printf("Error: 0x%X\n", result); // See S7 error codes simatic s7dos

| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | No physical connection | Check cable, power, and PG/PC interface selection. | | 0x0384 | S7DOS service not running | Run services.msc , find "S7DOS Service", start it manually. | | 0x00A0 | Address conflict | Two devices have same MPI/Profibus address. Change one. | | 0x00D2 | Block number invalid | The requested DB does not exist in the PLC. | | 0x00F1 | Access error (size mismatch) | You tried to read 100 bytes but the DB is only 50 bytes long. | int main() // 1

// 2. Define read request: DB10, DBB0 to DBB3 (4 bytes) s7_zone zone = S7_DB; // Data Block int db_num = 10; int start_byte = 0; int length = 4; BYTE buffer[4]; | | 0x00A0 | Address conflict | Two