C-FIX
For the dimensioning of steel and bonded anchors in concrete as well as injection systems in masonry.
C-FIX
novastar mtp driver

C-FIX-Online 

Includes current design standards, e.g. EN 1992-4 and EOTA TR 054 for the dimensioning of steel and bonded anchors in concrete as well as injection systems for anchoring in masonry. The anchor design in concrete can be performed either assuming a rigid base plate following a linear strain distribution or considering realistic stiffness conditions using a spring modeling approach.

Go to C-FIX online

novastar mtp driver

Advantages C-FIX Online:

  • The calculation of the anchor forces is performed in the software.
  • The stiffness of the base plate can be verified
  • Easy optimizing of the anchorages is possible
  • Multiple load cases can be defined and designed
  • The profile and the stiffeners are also considered for the calculation
  • The realistic deformations and stresses are shown
  • The FEM Design can be used also to check existing anchorages
  • Optionally, it is possible to perform the base plate design by checking the steel stress in all parts of the connection, as well as the welds, hole bearing resistance and concrete compression below the base plate
 

 

novastar mtp driver

Driver: Novastar Mtp

Need further help? Consult the official NovaStar knowledge base or contact your regional technical support engineer.

However, even the most powerful hardware is a paperweight without the correct software bridge. This is where the enters the picture. Whether you are a veteran LED technician or a newcomer to the industry, understanding the MTP driver is critical for stable communication between your computer and NovaStar’s MCTRL series controllers. novastar mtp driver

In the world of professional LED displays, NovaStar is a name that commands authority. As the industry leader in LED control systems, NovaStar’s hardware (sending cards like the VX series or receiving cards like the A series) is ubiquitous in concerts, corporate events, sports stadiums, and rental staging. Need further help

Your time is valuable

The FEM calculation tool provides you with further information to design a sufficiently stiff base plate. It is no longer necessary to switch between the anchor design software C-FIX Online and a finite element software for the base plate calculation and design. This feature is a real time-saver!

Go to C-FIX online

novastar mtp driver

C-FIX Offline

In addition to all current design standards C-FIX Offline includes also the verification according to „ENSO“ (Engineering Solution) which allows the calculation of extended design models that are possible according to fib. Furthermore, the module settings can be individually adapted to the local requirements.

To the offline version

novastar mtp driver

Advantages C-FIX Offline

  • Design of injection systems in masonry.
  • Design under dynamic actions - threshold or alternating loads.
  • Design under seismic action (earthquake).
  • Measurement under extraordinary stress.
novastar mtp driver

Download and System requirements FiXperience-Offline

Downloads

Online Installer (individual position version)

MSI Network-package for administrators (network-version)​

Offline Installation (CD Version)

System requirements

Main memory: Min. 8 GB
Operating systems:  Windows® 10, Windows® 11
Processor: x64-based processor (ARM processors are not supported)
Note: The current system requirements may vary based on your system configuration and your operating system.

cd-blue-75b965665c-62mfm