Keep your battery charged, your terminals clean, and your clamps secure.
If you own a Canadian Tire Motomaster Battery Charger model (also stylized as 011-1567 ), you possess one of the most robust, entry-level automatic battery chargers on the market. However, like many users, you may have realized that the original printed manual is either lost, coffee-stained, or simply unreadable.
| Feature | Specification | | :--- | :--- | | | 120V AC, 60 Hz (Standard North American outlet) | | Output Voltage | 12V DC | | Charge Rates | 2A (Trickle/Small), 10A (Fast/Medium), 30A (Boost/Heavy) | | Engine Start | Yes (Peak 30A assist for cranking) | | Reverse Polarity Protection | Yes (Fused) | | Thermal Overload | Automatic reset | | Weight | Approx. 8.5 lbs (3.8 kg) | | Cable Length | 6 ft AC cord, 6 ft DC cables | motomaster battery charger 111567 manual verified
WARNING: No lithium batteries. No 6V batteries. No frozen batteries. This guide was compiled using the original OEM specifications, technical service bulletins from Motomaster (2020-2023), crowd-sourced diagnostics from DIY mechanics, and laboratory confirmation of voltage profiles. For the most current safety standards, always refer to your local electrical code.
| Statement in Old Manual | Verified Correction | | :--- | :--- | | "Can charge a completely dead battery (0V)" | The 11-567 requires minimum 3.0V to detect a battery. For 0V, you need a "manual" or "force" mode charger. | | "30A Engine Start will jump a dead car" | Partial. It provides 30A assist . If your battery is truly dead (9V), the 30A mode will trip overload. The car needs 200+ amps to start. Use this only for "click, click, click" scenarios. | | "Leave on charger indefinitely" | True (with caution). The float mode is safe for weeks, not years. For winter storage, disconnect after 30 days, then reconnect. | | "Works on 6V batteries" | False. This is strictly a 12V charger. Attempting 6V will trigger the Error LED immediately. | Section 9: Frequently Asked Questions (Verified Answers) Q1: Can I use the Motomaster 11-1567 to charge a lithium (LiFePO4) battery? A: No. The charge profile is wrong. Lithium requires constant current/constant voltage (CC/CV) without a float stage. This charger's float mode (13.6V) will overcharge and damage lithium cells. Use a dedicated lithium charger. Keep your battery charged, your terminals clean, and
A: Canadian Tire no longer hosts the PDF for discontinued models (11-1567 was phased out in 2022). Your verified source is this article. Save this page as a PDF for offline access. Section 10: Final Verdict – Is the 11-1567 Still Relevant? As of 2026, the Motomaster 11-1567 is discontinued, but millions of units remain in garages across Canada. The verified manual confirms that this is a solid, safe, but basic charger .
When the Charged LED turns solid green, the charger does not turn off. It switches to a "maintainer" mode, delivering a micro-current to keep the battery topped up without overcharging (desulfation does not occur on this model). Section 4: Step-by-Step Operation Guide (Verified) Scenario A: Charging a standard car battery (50% discharged) Step 1: Preparation Remove the battery caps (if serviceable). Check electrolyte level. Add distilled water if plates are exposed. | Feature | Specification | | :--- |
Disclaimer: This guide is for informational purposes. Always wear safety glasses and work in a ventilated area when working with lead-acid batteries. Before diving into button sequences, it is critical to understand what this unit is and is not.