Top | Autodata 348

| Component | Torque (Nm) | Torque (ft-lbs) | | :--- | :--- | :--- | | Crankshaft center bolt | 150 Nm + 60 degrees (angle tighten) | 110 ft-lbs + angle | | Camshaft sprocket bolts | 65 Nm | 48 ft-lbs | | Timing belt tensioner bolt | 25 Nm | 18 ft-lbs | | Timing cover bolts | 10 Nm | 7 ft-lbs |

is historically associated with timing belt replacement procedures for specific multi-valve engines, most notably found in European and Asian passenger vehicles. While the exact vehicle application can vary slightly by software version and regional update, the number “348” is most famously linked to 1.4L, 1.6L, and 1.8L 16-valve petrol engines produced by major manufacturers like Vauxhall/Opel, Suzuki, and certain GM platforms during the late 1990s and early 2000s. autodata 348 top

Disclaimer: This article is for informational purposes. Always refer to the latest official Autodata technical publication for your exact vehicle, as engine designs and specifications evolve. The author is not responsible for any damage incurred during repair procedures. | Component | Torque (Nm) | Torque (ft-lbs)

Imagine you have removed the timing belt. You then rotate the camshafts to align their marks. Without the crankshaft locked at “top,” you have no reference. The crank may drift due to internal spring pressure from the piston rings. When you install the new belt and release the tensioner, you might be one or two teeth out of phase. Always refer to the latest official Autodata technical

This article provides a comprehensive breakdown of Autodata reference 348, covering its specific application, the critical “top” positioning procedure, common mistakes, and why this data point is non-negotiable for modern engine timing systems. First, it is essential to clarify what an Autodata reference number represents. Autodata organizes its technical data into unique numbered entries. These entries cover everything from fluid capacities and torque settings to complex ECU pinouts.