This manual will serve as your complete reference guide. We will cover the hardware overview, the pin-by-pin breakdown, power management, common troubleshooting issues, and a step-by-step example project. The Sensor Shield V5.0 is a passive expansion board designed specifically for the Arduino Uno R3 (as well as the Arduino Leonardo and similar form factors). It sits directly on top of your Arduino, stacking via the standard headers.
void setup() Serial.begin(9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); myservo.attach(10); // Servo is on pin 10 (SERVO1) arduino sensor shield v5 0 manual
int readUltrasonic() digitalWrite(trigPin, LOW); delayMicroseconds(2); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); long duration = pulseIn(echoPin, HIGH); int distance = duration * 0.034 / 2; return distance; This manual will serve as your complete reference guide