# Trip the outlet for 10 seconds apctest > 6 # Test features > 4 # Power off outlet 1 for 10 seconds
# Wait 600 seconds (10 minutes) after power fails before shutting down BATTVALUE 600 # Execute custom script when switching to battery ONBATTERY /etc/apcupsd/onbattery.sh In /etc/apcupsd/onbattery.sh , you can include logic: "If the server is the only thing on the UPS, don't shut it down until 5% battery remains." Once the server OS shuts down via PowerChute, it enters S5 (Soft Off) state. The NIC can still listen for WoL only if the motherboard has "Wake from S5" enabled in the BIOS. apc ups wake on lan best
If your APC UPS cuts power to save batteries, how does the computer receive the "Magic Packet" to wake up? If you hard shut down a server to save the UPS, how does it restart automatically when utility power returns? # Trip the outlet for 10 seconds apctest
If the UPS kills the AC power, the computer’s power supply dies. Even the best NIC cannot process packets without electricity. Consequently, your WoL magic packet disappears into a digital void. If you hard shut down a server to
This article dives deep into the for marrying APC UPS hardware with Wake-on-LAN functionality to achieve true "hands-off" infrastructure. The Fundamental Conflict: Sleep vs. Starvation Before we discuss solutions, we must understand the physics of the problem.
Stop wrestling with dead ports and missed magic packets. Configure your APC UPS to cut power gracefully, and configure your BIOS to restore it automatically. That is the industry "best practice" that most articles forget to mention. Are you running a home lab or a data center? Share your apcupsd configuration in the comments below.